How To Sync Polk Audio Subwoofer To Soundbar? – Easiest Way For The Beginners!

Sync, A short form of Schyronize, is a process in Polk soundbars in which the two devices are supposed to operate at the same time. And thus, your Home theatre (Polk Soundbar and Subwoofer or Speaker) will give you the audio results you’ve dreamt of.

But How do you Sync The Polk Audio Subwoofer To The Polk Soundbar? Let me Put forward the Simplest way!

So, To Sync Polk Audio Subwoofer To The Soundbar, First Unplug the Subwoofer and Then press the Sync Button for almost 3 seconds which is located on the back.

Plug in the woofer, and the Green light will start to beep fastly. Indicating that both devices are paired with each other.

Want to know further detail? Allow me to compile them one by one here in this article!

How To Sync Polk Audio Subwoofer To Soundbar? Step-By-Step Guidelines

There’s no need for special expertise or technique to get linked your Subwoofer with the soundbar. All you need to do is to Follow the steps mentioned below!

• First Of All, try Turn On your Soundbar by checking the Plug and AC Power outlet.

• Next, You’ve to press the Sync Button. Which is located on the back of the Subwoofer.

• Now You’ve to Hold this Key for minimumly 3 seconds.

• As soon as the green light starts to blink. Leave the button and let the Polk soundbar connect to the Polk Subwoofer.

• The Green LED light will start to beep faster and faster, which is a clear sign that the devices are getting paired.

• And then, the Soundbar and the Woofer are paired, and A Popping Sound is generated. This point may be optional for some models.

So, Here You Go! You’ve successfully paired the Subwoofer and the soundbar, which are ready to sync and give you a Theater vibe.

Watching this YouTube Video will also help you out in managing the situation in this problem.

What Happened When The Polk Soundbar And The Polk Subwoofer Don’t Get Sync? – Indications You May Notice!

Now, we’ve understood how to synchronize the Polk soundbar and the woofer. But how will you get to know that there’s a fault in the system?

The answer to that query is mentioned here.

Basically, When you used to connect the Subwoofer and the Soundbar Wirelessly, they won’t Sync. Then it can be due to an invalid connection. They may don’t get paired. Or disconnect after some time of connection.

This happens because the subwoofer may stop receiving signals from the soundbar or the Polk soundbar has connected to other devices like surround speakers.

That’s why they’ll stop working together. But why does it happen? Why do the soundbar and the Subwpoofer not syncing?

To get answered, Read the piece of information given below!

Top 3 Causes That The Polk Soundbar And The Subwoofer Not Syncing – Must Check Them Out!

1. Loosen Power Cord Or Faulty AC Outlet:

The perfect power source is the top priority of any of the soundbars and subwoofers to get synced or paired. So, if the power source is not working well.

Or is not attached firmly. Then the device will not get the appropriate power to operate and eventually not function properly. So, make sure The soundbar has Turned On and Is Operating.

2. Inefficient Connection Of The Polk Soundbar And The Subwoofer:

Another matter of concern is the connection you’re making between the soundbar and the woofer.

If you’re building Bluetooth Connection (connecting wirelessly), then make sure there’s none other than these 2 devices with enabled BT. Because the soundbar will switch the input.

And keep the audio system at an appropriate distance from each other. So that the signals will ll sent completely to the woofer receiver.

On the other hand, If you’re connecting the polk subwoofer and the polk soundbar via Optical Cable then make sure the HDMI cables are firmly fixed into the slots and are installed rightly.

3. If The Surround Speakers Are Linked With The Soundbar, Then The Subwoofer Will Not Sync:

Some people add surround speakers to their audio system. That gets paired with the soundbar. As I’ve mentioned, Any third device that enables BT will disrupt the Polk Sounbar’s and Subwoofer’s connection.

So, connect them optically and let their BT be disabled.

And these were the reasons that your Polk soundbar is not syncing with the Subwoofer. Work on the procedures we’ve mentioned. And try to fix these factors in the easiest ways in this article.

FAQs:

How do I connect my subwoofer to my soundbar?

Connecting It Optically: If you’re linking the devices via wires, then make sure all the cables are tightened into the right and accurate slot.

Connecting It Wirelessly: If you’re pairing the devices wirelessly via Bluetooth, then ensure that there’s no extra device with open BT and that the devices are close enough to send and receive signals.

How To Sync Polk MagniFi MAX Wirelessly?

The Polk MagniFi Max is just a model of the subwoofer and needs the same method to get synchronized, as we’ve described above.

Pressing the Sync Button for 3 seconds at the back will lighten up the Green LEDs to blink fastly. And as a result, it’ll get connected to the soundbar if plugged in and turned ON.

This method is standard and is applicable to almost every Polk Subwoofer for syncing.

Quick Summary:

If you’re looking to sync the Polk Soundbar and the Subwoofer, then ensure that the Soundbar is turned On. Press and Hold for 3 seconds the SYNC Button on the back of the woofer.

Wait for the Green LED to blink and indicate the processing of their connection.

Try to get a proper AC outlet for the perfect power source for Soundbar. Check out the connection you’ve to build between teh devices. And cautions you can use to let the Soundbar work efficiently.

Also, watch the YouTube video to get a visual understanding and in-depth point of view about this problem.

And Enjoy the Loud, Syncing Subwoofer and Soundbar enchanting your Home theater system.