Daily usage of the LG sound bar comes up with so many problems, of which having No audio is the most common one. So, If you guys are having the same issue, then Calm Down! We are here to let you know about the incredible ways of resolving this matter.
Why Does There No Sound From The LG Soundbar? Faulty Cable connection, Inappropriate Bluetooth connection, improper HDMI connection, wrong settings, and defects in the sound bar itself will cause no audio in output.
However, Working on these factors and replugging the system for almost 10 seconds will resolve this problem.
Don’t Get panic; the details of these mentioned strategies are mentioned right below. So, without wasting further time, Let’s get into it!
One of the main reasons for the LG soundbar not producing excellent output includes the problem with the wiring of the LG soundbar with other Devices.
When the cable is defective or not inserted properly, then obviously, you’ll have no sound in return. Because the network isn’t assembled yet.
Another factor that will definitely result in the “no working” of the LG Soundbar is the failed wireless connection.
In case you guys are not using cables and wires to build the connection, then definitely you’re looking for the Bluetooth connection.
Keep In mind that the soundbar will proceed only when it is connected to a specific device like a TV. Otherwise, there’ll be no sound from it.
We all know that there’s still a method of pairing that has not been discussed yet; Yes, the HDMI connection of the devices.
Mark it that whenever the HDMI cords are shuffled from that specific one, for example, HDMI-eARC is installed in HDMI-ARC and vice versa, then obviously, you’ll have no sound in return.
Before moving further, I would like to put the fault here, which is defected or malfunctioned Power cord of the Soundbar.
If the power supply is having an issue, then obviously, the device will not run, and consequently, there will be no sound from the soundbar.
Last but not least, wrong and inappropriate settings of the LG soundbar and the other device like TV will also end with no sound from the soundbar.
In case the TV has not allowed the soundbar to get connected, the volume is very low, Or the TV settings have allowed the wrong input, then obviously, there’ll be no sound from the LG Soundbar.
And here we go! These are the few causes that are letting the LG soundbar not produce the sound and not work the way it used to. Watch This Youtube video for further in-depth details and solutions to this problem.
Now, let’s jump over the solution sections without delaying anymore.
One of the most important things that you can do in case your soundbar is not running properly is to, Replug it after a few seconds. Let the cord out of the circuit and then re-install it after 10-15 seconds. This mini reset will have so many chances to remove bugs and let the soundbar work.
The next thing which has to move is t build the best and strong Wire connection between the LG Soundbar and the Device. So, Ensure that the cables connecting the LG soundbar to other devices are securely and properly connected.
Again relevant to the above-discussed point, you must have to use cables that are Compatible and of High Quality without any defects in order to avoid any potential connection issues.
Now, make sure that you’re installing the right end of the cable into the right port of the soundbar and that they are plugged in thoroughly. Confirm that the HDMI cables are correctly connected to the appropriate HDMI ports on both the soundbar and the device, such as the TV.
Keep in mind that the cable connections should be properly seated and will not be loosened.
Another matter of great concern is to verify that the LG soundbar is correctly paired with the device using the appropriate wireless connection method, such as Bluetooth.
Ensure that both the soundbar and the device are within the recommended range for a stable wireless connection and they aren’t connected to any other device.
Lastly, Review the settings by verifying that the TV recognizes the soundbar as the audio output device and that the soundbar is selected as the primary audio source.
Furthermore, Adjust the volume settings on both the soundbar and the TV to an appropriate level, ensuring they are not set too low or muted.
Also, Check the TV’s input settings to ensure the correct input source is selected, allowing audio to be routed to the soundbar.
And Voila! You have finally resolved these matters at home without taking your device to the mechanic. But in case you’re unable to fix this problem of not getting audio from the soundbar, it is suggested to take the Customer Support Of LG or simply let the mechanic do its work.
In case the batteries of the remote have been dead or corroded, or there’s a fault in the remote system of the soundbar, the remote will not send the command to the soundbar, and as a result, it will not work.
You can do a factory reset on the LG Soundbar and can take a fresh restart by holding and pressing the Input and Bluetooth button simultaneously for almost 10 seconds. And then wait for the LED Sign. Start the soundbar and see whether it has resolved the matter or not.
Yes! We must have done this because if the audio format selected on TV is different from the audio format of the soundbar, then obviously, the devices aren’t said to be connected, and thus there’ll be no audio at the end. That’s why you must check the audio format before connecting any two devices.
So, in the end, we’ve reached that point where we know why there’s no audio from the LG Soundbar.
This all happens because of inappropriate Cable, Bluetooth, or HDMI connection, wrong settings of the devices, and defects in the soundbar itself.
But nothing to worry about; all these problems don’t need a technical solution.
Simply replugging the system for almost 10 seconds and creating a strong valid connection will sort out this problem.
Just implement the data we’ve compiled above for better results, and feel totally free to get redirected to the sources we’ve linked here.